ABB DCS550 Drive Parameters – here you can find all parameter for programming. With the help of these parameter you can easily program drive. All list of parameter like actual signal, motor data, limit parameter and fault function.
Simple View parameter, for complete detail parameters download parameter manual
| Motor Data | |||
| 99.02 | ……V | Armature Voltage | |
| 99.03 | ……A | Armature Current | |
| 99.04 | ……rpm | Base Speed | |
| 9910 | ……V | Nominal Mains Voltage | |
| 99.11 | ……A | Field Current | |
| ID Run | |||
| 99.06 | 2 = FieldCurAuto | ||
| 1 = ArmCurAuto | |||
| Start/Stop | |||
| 10.15 | DI1 | Field Start/Stop | |
| 10.16 | DI1 | Armature Start/Stop | |
| 10.03 | Not Used | ||
| 10.06 | Not Used | ||
| 10.08 | Not Used | ||
| 10.09 | Not Used | ||
| 10.21 | Not Used | ||
| Speed Reference | |||
| 11.03 | 2-AI1 | ||
| 13.03 | 1 = 0V-10V Uni | ||
| ACC/DEC Time | |||
| 22.01 | ……s | acceleration time 1 | |
| 22.02 | ……s | deceleration time 1 | |
| Limits | |||
| 20.01 | ……rpm | Minimum Speed | |
| 22.02 | ……rpm | Maximum Speed | |