Forum

Share:
Notifications
Clear all

WARNING 48 in danfoss FCD302 drive

1 Posts
1 Users
0 Reactions
158 Views
Posts: 18454
Admin
Topic starter
(@click2electro)
Member
Joined: 4 years ago

Cause : 1.8 V supply low comes when the 1.8 V DC supply used on the control card is outside of allowable limits. The power supply is measured on the control card.

  1. Check for a defective control card.
  2. If an option card is present, check for an overvoltage condition.
Share: