LS-Electric XGT Network Module

LS-Electric XGT Network Module – Find comprehensive resources for LS-Electric XGT Network Module, including product catalogs, manuals, price list, programming guides, fault, alarm, warnings & software support. Get expert assistance for troubleshooting and optimization.

LS-Electric XGT Network Modules are crucial components that enable seamless communication between the XGT PLC and other devices or systems within an industrial automation network. These modules facilitate data exchange, allowing for integrated control and monitoring across various devices.

Catalog

Features

Provide various Ethernet, serial network solutions
Large capacity data & high-speed network system
Easy protocol editing and network parameter setting: XG5000
High reliability: Ring system(RAPIEnet)
Various diagnostic functions and network status information

XGT Ethernet system (XGL-EFMTB, XGL-EFMFB)	XGT Computer-Link (XGL-C22B, XGL-CH2B, XGL-C42B)
XGT DeviceNet system (XGL-DMEB)	XGT Profibus-DP [Pnet] system

XGT Ethernet system (XGL-EFMTB, XGL-EFMFB)

Features

Supports max media speed of 1Gbps
Supports 1Ch 2Ports
- Line topology configuration with relay parameter setting
- Dual ports (T.Pair / F.Optic)
Server standard maximum communication load 5,000pps
Fiber optic module (XGL-EFMTB) has replaceable connector, communication speed is improved to 1Gbps, and maintenance is easy
XG5000 old and new versions available
User defined frame UI enhancements make it easier to use
Various diagnostics made possible by strengthening log function
Open ethernet and dedicated protocol (RAPIEnet)

Specifications

– Open Ethernet

Item			Product Name
Item			XGL-EFMTB	XGL-EFMFB
Transmission Specification	Baud rate		10/100/1000Mbps	100/1000Mbps
	Transmission Type		Base Band
	Max. extended length between nodes		100m(Node-Hub)	2km
	Max. segment length		–	–
	Max. number of nodes		Hub connection(Up to 9 recommended)	30/Segments
	Distance between nodes		–	Integral times of 0.5m
	Max. protocol size		1,500 Byte
	Access method to service zone		CSMA/CD
	Frame error check		CRC 16 = X15+X14+X13+….+X2+X+1
Basic Specification	Current consumption (5V)	100Mbps	560mA	750mA★
Basic Specification	Current consumption (5V)	1Gbps	900mA	740mA★
Weight	146 g		156 g	–

★Formerica SFP standard

XGT Computer-Link (XGL-C22B, XGL-CH2B, XGL-C42B)

Features

Smart server recognizes the protocol (XGT dedicated communication or Modbus RTU/ASCII) automatically and activates
Repeater mode may be used use as an insulated repeater or convert RS-232C to RS422/485
Contains a built- in termination resistor and can be set in the basic parameter window
Easy protocol editing and communication parameter setting: XG5000
Long-distance communication via modem connection
Dedicated protocol for multi-drop configuration connectable up to 32 units
Flexible communication speed setting (300~115,200bps)
Supports full duplex and half duplex communication
Max. 12 modules available in one CPU
Various connection to MMI S/W (XGT, Modbus RTU, Modbus ASCII)
Various diagnosis functions using XG5000 (I/O, link status, service status)
Supports simultaneously dedicated service in remote connection

Specifications

Item		Specification
Item		XGL-C22B	XGL-CH2B	XGL-C42B
Serial communicat-ion channel	RS-232C	2 channels	1 channel	–
	RS-232C	Conforms to RS-232C standard
	Line config	1:1
	RS-422/485	–	1 channel	2 channels
	RS-422/485		Conforms to RS-422/485 standards
	Line config		1:1, 1:n, n:1
Modem connection function		Remote communication with external devices is available via public telephone line by connecting external modem to the module.		–
Operating mode (specified per port)	P2P	XGT client, Modbus ASCII/RTU client, Use defined communication
Operating mode (specified per port)	SERVER	XGT server, Modbus ASCII/RTU server
Data type	Start Bit	1
	Data Bit	7 or 8
	Stop Bit	1 or 2
	Parity	Even/Odd/None
Synchronization type		Asynchronous type
Detecting error		BYTE SUM, WORD SUM, BYTE XOR, DLE AB, DLE SIEMENS, LSIS CRC, CRC 16, BYTE SUM 2’ COMP, BYTE SUM 1’s COMP 7BIT SUM, 7BIT XOR, CRC 16 IBM, CRC 16 CCITT
Transmission speed (bps)		300 / 600 / 1,200 / 1,800 / 2,400 / 3,600 / 4,800 / 7,200 / 9,600/19,200 / 38,400 / 57,600 / 64,000 / 76,800 / 115,200bps
Station No. setting		Setting range : 0-31, Max. station No. : 32 stations
Transmission Distance(m)		RS-232C: Max.15 (extendible if modem used)		–
Transmission Distance(m)		–	RS-422/485: Max. 1,200m
Diagnosis function		Status LED diagnosis XG5000 diagnosis service(Frame monitor, Status by service, Loop-Back diagnosis) History, Saving history
Appearance size(mm)		98(H) X 27(W) X 90(D)
Current consumption(mA)		420	480	520
Weight(g)		121	119	116

XGT DeviceNet system (XGL-DMEB)

Features

DeviceNet protocol
Direct control of various I/O devices via Dnet system
Max. 63 slave modules controlled by one master module
Flexibility in network configuration: Multi-drop and T branch connection
Connectable to other master module and various slave modules
Provides an ‘ Auto Network Scan’ function and various information with configuration tools (N Configurator)
Communicates a high-speed link parameter
Connectable to various slave I/O including other module
(Common I/O, Actuator, Switch, Optical switch, Valve, Inverter, A/D module, Position controller etc..)
Automatic monitoring of slave modules in the network: Auto-scan (XG5000)
Easy expansion: Up to 12 master modules
Network setting by N Configurator/XG5000 (Parameter setting, diagnosis and monitoring)

Specifications

Item			Performance Specifications
Transmission Specification	Transmission Speed (kbps)		125/250/500
	Transmission Type	I/O Connection	G2, UCMM
	Transmission Type	I/O Communication	Poll, Bit strobe, COS, Cyclic
	Communication distance(m)	Thick Cable	500 (125kbps)/250 (250kbps)/100 (500kbps)
	Communication distance(m)	Thin Cable	100 (125/250/500kbps)
	Terminal resistance (W)		121 (1%, 1/4W)
	Max.drop length(m)	125 kbps	6 (Max. extended length 156)
		250 kbps	6 (Max. extended length 78)
		500 kbps	6 (Max. extended length 39)
	Data Packet		0~8 Bytes
	Message Access Control		CSMA/NBA
	Network Structure		Trunk/drop line Power/Signal cable inside the identical network cable
	Bus Type		Poll type
	Max. number of nods		Up to 64 (including master) MAC IDs (MAC Identifier)
	System Features		Insertion and removal of nod available in voltage On status
	Operation Voltage		DC 24V
	Diagnosis Function		Module: Checks duplicated station/ Checks CRC error N Configurator: Detects defective station/Checks BusOff/Auto-scan function XG5000: Monitors High-speed link
	Master/Slave Operation		Available only in master
Parameter setting			1) N Configurator (CONFIG Port of Dnet I/F) 2) Setting to High-speed link of XG5000 (RS-232C of CPU module or USB port)
XG5000 (High -speed link)	Data process unit		Byte
	Send/Receive period		Select among 20ms, 50ms, 100ms, 200ms, 500ms, 1s, 5s and 10s – Default : 20ms
	Max. communication point		Send 128,520points, Receive 128,520 points, 16,065 bytes respectively
	Max. block number		63 (Setting range: 0~62)
	Max. point number per block		2040 points (255 bytes)
Basic Specification	Max. modules installed		Up to 12 (available on basic base and added base)
	Internal-consumed current (mA)		350mA
	Weight (g)		81g

XGT Profibus-DP [Pnet] system

Features

Profibus-DP protocol
Communicates amongst a master automation device and distributed slave I/O device
Fast slave communication without an application layer
Transmission speed: 9.6Kbps ~ 12Mbps
Transmission distance: Max. 1,200m
Max. 126 slave stations available (32 stations per segment)
Network setting using N Configurator/XG5000 (Parameter setting, diagnosis and monitoring)
I/O data of master station: 7 kbytes
Automatic monitoring of slave modules in the network: Auto-scan (XG5000)
Multi master
Easy configuration tool: N Configurator / XG5000

Specifications

Item	XGL-PMEB
Module Type	Master
Network Type	Profibus-DP
Standard	EN50170/DIN19245
Interface	RS-485 (Electric)
Transmission Route	Bus type
Modulation Type	NRZ
MAC	Local Token Ring
Max. Distance & Transmission Speed	Distance (m)	Transmission Speed (bps)
	1,200	9.6k/19.2k/31.25k/45.45k/93.7k
	1,000	187.5k
	400	500k
	200	1.5M
	100	3M/6M/12M
Max. number of stations per network	126
Max. number of stations per segment	32 (including master & repeater)
Max. number of modules per node	24 modules
Cable used	Electric-twist shielded pair cable
Max. communication size	7 KB
Max. size per slave	244 bytes
Max. number of units to be installed	XGK-CPUH/XGI-CPUU	XGK-CPUS/CPUA/CPUE
Max. number of units to be installed	12	12
Installation Position	XGK-CPUH/XGI-CPUU	XGK-CPUS/CPUA/CPUE
Installation Position	Basic base ~ expansion stage 7	Basic base ~ expansion stage 3
Communication Parameters to set	XG5000 , SyCon (XGL-PMEA Dedicated Configuration Tool), N Configurator (XGL-PMEB/C Dedicated Configuration Tool)
Internal-consumed current(mA)	500
Weight (g)	88

Item		XGL-PSEA
Standard		EN50170 / DIN 19245
Interface		RS-485 (Electric)
Media access		Polling
Topology		Bus
Modulation		NRZ
Network Interface		Auto baud rate
Master / Slave		Slave
Max. number of slave per network		99
Max. number of slave per segment		32
Cable		Shield twisted pair cable
Max. I/O data		244 byte
Configuration tool		XG5000
Transmission distance and speed	Trans. speed(kbps)	9.6	19.2	93.75		187.5	500
	Max. network length(m)	1200	1200	1200		1000	400
	Trans. speed(kbps)	1500	3000	6000		12000	–
	Max. network length(m)	200	100	100		100	–
Max num. of node		99(0~98)
Max num. of transmission block		24
Max num. of installation		12ea (XGR: Max. 6ea)
Installation		XGK-CPUU/H, XGI-CPUU			Main base ~ 7th Expansion base
		XGK-CPUE, XGI-CPUE			Main base ~ 1st Expansion base
		XGK-CPUA/S, XGI-CPUH/S			Main base ~ 3rd Expansion base
		XGR-CPUH/F, XGR-CPUH/T			Main base
Current consumption (mA)		410
Weight (g)		103

Item		XGL-PSRA
Standard		EN50170 / DIN 19245
Interface		RS-485(Electric)
Media access		Polling
Topology		Bus
Modulation		NRZ
Network Interface		Auto baud rate
Master / Slave		Slave
Max. number of slave per network		100
Max. number of slave per segment		32
Cable		Shield twisted pair cable
Max. number of communication points		244 byte
Transmission distance and speed	Trans. speed(kbps)	9.6	19.2	93.75	187.5	500
	Max. network length(m)	1200	1200	1200	1000	400
	Trans. speed(kbps)	1500	3000	6000	12000	–
	Max. network length(m)	200	100	100	100	–
Max num. of node		100(0~99)
Max. number of installation		12
Max. digital I/O		768
Max Analog I/O Channel		Input : 122ch. / Output : 96ch
Current consumption (mA)		600
Weight (g)		114