click2electro

Cause: SAFE TORQUE OFF comes when the Safe Torque Off (STO) safety function has been activated. This function electronically inhibits the drive from producing torque, preventing the motor from rotatin...

Cause: I2T MOTOR TRIP comes when the motor's thermal overload protection (I²t) has tripped. This protection is designed to prevent the motor from overheating due to prolonged overcurrent conditions, w...

Cause: RESOLVER ERROR comes when the drive is detecting an issue with the signals coming from the resolver. A resolver is a type of rotary transducer used to provide precise angular position informati...

Cause: FIRMWARE ERROR comes when a critical problem with the drive's internal firmware. This is a serious fault that usually means the core software that controls the drive's operation has encountered...

Cause: AERR APP ERROR comes when the user application program running within the drive has encountered a runtime error. AERR APP ERROR fault in Parker AC890 drive indicates that the application progra...

Cause: APP APP HALTED comes when the user application program running within the drive has been intentionally stopped or has encountered an error that caused it to halt. APP APP HALTED fault in Parker...

Cause: GEAR OUTPUT GBX ERROR comes when an issue with the gearbox output feedback in a system where a gearbox is being used and monitored. This fault suggests that the drive is detecting an unexpected...

Cause: Feedback encoder calibration error comes when the drive has detected a problem during the encoder calibration process or that the calibration data is invalid or missing. ECAL FBK ENCODR CAL fa...

Cause: AT TORQUE LIMIT ERROR comes when the drive has reached its Active Torque Limit and is experiencing an error or unexpected behavior at this limit. ATNE AT TORQUE LIMIT ERROR fault in Parker AC8...

Cause : MOTOR STALLED ERROR comes when the motor must be able to rotate during Autotune. This can be caused by a variety of factors, including mechanical issues, electrical problems, or software error...

Cause : MOTOR TURNING ERROR comes when the motor must be stationary when starting the Autotune. This could be due to a variety of factors, such as mechanical issues, electrical problems, or software e...

PLOS POWER LOSS STOP fault in Parker AC890 drive - This fault comes when power Loss Stop sequence has ramped Speed Setpoint to zero or timed out.

ATNA LEAKGE L TIMEOUT fault in Parker AC890 drive - This fault comes when the leakage inductance measurement requires a test current to be inserted into the motor. It has not been possible to achieve...

STAC STACK TRIP fault in Parker AC890 drive - This fault comes when the drive was unable to distinguish between an overcurrent/Dsat or overvoltage trip.

ATN8 MAX RPM DATA ERROR fault in Parker AC890 drive - This fault comes when the MAX SPEED RPM is set to a value outside the range for which Autotune has gathered data. Autotune gathers data on the mot...