Jaivignesh1898

@click2electro sir I have a same problem I changed service mode to normal mode then also same problem sir

@click2electro sir I changed field bridge then during spinning speed starts decreasing from maximum speed it shows arm over current I checked thyristor all are ok

@click2electro Max 6.15 min 2.2

@click2electro autotune is successful in both motor field and armature

@click2electro after full speed reached and then during when speed decrease from full speed the fault occurs

@click2electro sir by retadation of current the drive shows M1 flexovercurrent F515 fault how to resolve this sir