Parker AC650V Drive – Find comprehensive resources for Parker AC650V AC drives, including product catalogs, manuals, price list, programming guides, fault, alarm, warnings & software support. Get expert assistance for troubleshooting and optimization.
Parker AC650V drive is an enhanced version of the AC650 series, designed for more demanding industrial motor control applications.
| Output Power: | 0.3 to 150 HP |
| Input Voltage: | 1*230 VAC, 3*230 VAC, 3*380 to 460 VAC |
Features
The AC650V expands upon the simple, no-fuss philosophy of the AC650 and provides reliable, robust motor speed control from 0.3 to 150 HP (0.25kW to 110kW). With the addition of sensorless flux vector technology, the AC650V allows improved motor speed control at lower speeds, better speed regulation of variable loads and higher starting torques for high inertia systems. The variable torque configuration option on frames C-F makes the AC650V ideally suited to energy saving in pump and fan applications.
The AC650V offers the same high level of specification as the AC650 and also includes:
- High torque sensorless vector control mode for advanced motor control
- Selectable constant torque or (higher) variable torque rating for centrifugal pump and fan applications allowing optimum inverter sizing to suit the application
- Fully configurable with graphical software tools such as DSE Lite
- Additional user configurable I/O points offering increased control capabilities
- Additional PROFIBUS communications options for integration into PLC systems
- Wall and panel mounting options above 10HP
- Extended power range to 150HP makes the AC650V suited to a wide variety of uses.
Standards:
The AC650V Series AC drives listed on this page meet the following standards when installed in accordance with the relevant product manual:
- CE Marked to EN50178 (Safety, Low Voltage Directive)
- CE Marked to EN61800-3 (EMC Directive)
- UL listed to US Standard UL508C
- cUL listed to Canadian Standard C22.2 #14.
Technical Specifications/Power Supply:
- Single Phase Units
- 220-240 Vac +/- 10 %, 50-60 Hz +/- 5%
- Three Phase Units
- 380-460 Vac +/- 10 %, 50-60 Hz +/- 5%
Environment:
- 0-40°C (derate to 50°C)
- Up to 1000m ASL (derate 1% per 100m to 2000m maximum)
Protection:
- IP20
Overload:
- Constant torque rating: 150% for 30 seconds
- Variable torque rating (pumps and fans): 110% for 30 seconds
Output Frequency:
- 0-120Hz
Inputs/Outputs:
- Analog Inputs 2; Speed Control
- 0-10V, 0-10V/4-20mA
- Analog Output 1; User configurable output frequency/load 0-10V
- Digital Inputs 5; User configurable Start/Stop/Direction/pre-set speeds (8)
- Digital Inputs/Outputs 2; User configurable as inputs or outputs
Digital Relay Output:
- Relay output 4A @ 240V
- All digital outputs configurable for: at (not at) speed/at (above) minimum speed/running
- (stopped)/health (tripped)/above (below) pre-set load
Motor Thermistor Input
Power Supply Outputs:
- 24 VDC (50mA) – Digital I/O Supply
- 10 VDC (10mA) – Analog reference supply
Communications Options:
- RS485/RS232
- Profibus
Technical Specifications
| Output Power: | 0.3 to 150 HP |
| Input Voltage: | 1*230 VAC, 3*230 VAC, 3*380 to 460 VAC |
| Modes of Control: | V/Hz, Sensorless Vector |
| Communication Interface: | RS232/RS485, Profibus |
| Specifications Met: | CE (EMC & LVD), UL Listed, cUL Listed |
| Operating Temperature: | 0 to 40 °C (derate up to 50°C max), 32 to 104 °F (derate up to 122°F max) |
| Operating Altitude: | up to 1000 m ASL (derate > 1000m) |
| Overload Rating: | Heavy Duty Rating (Constant Torque) : 150% for 60s %, Normal Duty Rating (Variable Torque – pumps and fans) : 110% for 60s % |
Parker AC650V builds upon the foundation of the AC650 by adding advanced control features and increased flexibility, making it a powerful solution for more complex and demanding motor control needs.