Schneider Lexium LXM52 Servo Drives

Schneider Lexium LXM52 Servo Drives – Find comprehensive resources for Schneider LXM52 servo drives, including product catalogs, manuals, price list, programming guides, fault, alarm, warnings & software support. Get expert assistance for troubleshooting and optimization.

Schneider Lexium LXM52 Servo Drives image

The Schneider Lexium LXM52 servo drives are a series of standalone servo drives designed for use with the PacDrive 3 automation platform.

CatalogManual

Lexium 52 series are well suited for economical configuration of servo drive solutions with self-contained single axes, with their integrated 3-phase power supply, embedded digital I/O, available in five power levels from 6 to 72 A.

  • They can be controlled via Sercos with the PacDrive 3 controller Eco and Pro series: they match in particular with the smaller LMC Eco controllers, when only few servo axes are required.
  • Fully integrated in PacDrive system and Ecostruxure Machine Expert.
  • Electronic name plates allow controllers to recognise and configure the drives automatically.
  • Integrated safety functions reduce design times and make it easier to comply with safety standards.
  • Hardwired invert enables safety input (STO), internal braking resistor and internal EMC filter.
  • Overload capacity: high peak current (up to 4 times the continuous current).
  • Power density: the compact size of the servo drives offers maximum efficiency in a small space.
  • Compliance with electromagnetic compatibility (EMC) requirements.
  • Power levels: from 1.5 to 24 A continuous current and 6 to 72 A peak current.
  • Power ratings between 0.4 and 7 kW (0.536 and 9.383 hp).
  • External braking resistors, when the servo motor has to be braked frequently.
  • Additional EMC input filters to reduce conducted emissions on the line supply below the limits of standard IEC/EN 61800-3 edition 2, category C2 or C3.
  • Line chokes for improved protection against overvoltages to reduce harmonic distortion of the current.

Dynamic, highly efficient servo motors

  • Lexium SH3 is dynamic in its performance, with a higher power density of up to 9000 rpm. It features different flange dimensions, setups, and an additional connection.
  • Lexium MH3 is available in four flange series designed for medium inertia, high-load uses, and small-sized machines operating up to 6000 rpm.
  • Lexium SHS stainless steel is designed with a high-torque output, featuring one motor cable for easier installation and maintenance. This makes it perfect for use in Food and Beverage and Pharmaceutical settings.

Click2Electro

Typically replies within minutes

Need any help for fault, alarm, programming, manual ?

Get free chat support...

🟢 Online