WEG CFW11 Pump Genius Multiplex View Only Panel

WEG CFW11 Pump Genius Multiplex View Only Panel – Find comprehensive resources for WEG CFW11 Pump Genius Multiplex View Only Panel , including product catalogs, manuals, price list, support. Get expert assistance for troubleshooting and optimization.

WEG CFW11 Pump Genius Multiplex View Only Panel image

The Pump Genius Multiplex View Only HMI panel provides detailed information on the CFW11-PGM (Pump Genius Multiplex) System on one screen. To use this HMI Panel on an existing or new CFW11-PGM (Pump Genius Multiplex) system, each CFW11-PGM shall have CAN/RS485-01 communication module. This enclosed HMI panel will provide detailed information about the CFW11-PGM (Pump Genius Multiplex) System and allow changing the Control set point and PID parameters.

Characteristics

  • 12”h x 12”w x 6”d, UL Type 3R/4/12, wall mount enclosure with 7” Touch Screen (LED, 800 x 400 Resolution) HMI mounted on the enclosure door;
  • Works with existing or new CFW11-PGM (Pump Genius Multiplex) System, only;
  • Requires CAN/RS485-01 Communication module (one for each VFD).
  • Enclosed door-mounted CFW11-PGM View Only HMI provides;
  • Mostly text-based screen representations of operations and variables;
  • The ability to change Control setpoint, PID Parameters, Pump/VFD device name, and communication setup. Password protected to allow only authorized users to make changes;
  • The ability to reset the VFD faults;
  • One RJ45 communication port for the customer supervisory system to communicate with PG HMI using BACnet/IP or Ethernet/IP;
Panel typeControl panel
Horsepower (HP)Not Applicable
Enclosure typeWall mount
Thermal ManagmentNone
General enclosure optionsNone
Main voltage120 V
Control VoltageNot applicable
Frequency60 Hz
SCCR ratingTo be defined
Disconnect switch typeNone
Bypass typeNone
Control power transformerNo transformer required
Reactor/FilterNone
CommunicationRS-485
Enclosure ratingType 4
Nominal width406.4 mm / 16.0 in
Nominal depth203.2 mm / 8.0 in
CertificationUL