Cause : EEPROM read-write fault comes when there is a problem with accessing or writing data to the EEPROM (Electrically Erasable Programmable Read-Only Memory). 

"E21.03" fault in inovance MD800 drive indicate EEPROM read-write fault. This means a problem with the EEPROM, preventing the drive from accessing or modifying its stored data.

Possible Causes:

1. EEPROM Failure: Physical damage or wear to the EEPROM chip can prevent successful read or write operations.
2. Electrical Issues: Problems such as power supply fluctuations or electrical noise can interfere with EEPROM operations.
3. Firmware Corruption: Corruption or errors in the drive’s firmware can lead to EEPROM read-write faults.
4. Data Corruption: Issues with the stored data, such as corruption or inconsistency, can cause read-write faults.
5. Connection Issues: Faulty or loose connections between the EEPROM and the drive’s main control board can lead to communication problems.

Troubleshooting Steps:

1. Inspect EEPROM and Connections:

   • Check Physical Condition: Examine the EEPROM chip for any visible signs of damage or wear. If physical damage is evident, the EEPROM may need to be replaced.
   • Verify Connections: Ensure that all connections between the EEPROM and the drive’s control board are secure and properly made. Re-seat or repair connections if necessary.

2. Review Power Supply Stability:

   • Measure Voltage Levels: Verify that the power supply voltage to the drive is stable and within the specified range. Power fluctuations can affect EEPROM operations.
   • Address Fluctuations: If there are power supply issues, stabilize the power source to ensure consistent operation of the drive and EEPROM.

3. Check Firmware and Software:

   • Update Firmware: Ensure that the drive’s firmware is up-to-date. Firmware updates can address bugs or issues related to EEPROM operations.
   • Reload Firmware: If firmware corruption is suspected, reload or reinstall the firmware to restore proper functionality.

4. Inspect Data Integrity:

   • Verify Data: Check the integrity of the data stored in the EEPROM. If data corruption is detected, it may be necessary to reset or reload configuration settings.
   • Perform a Reset: As a precaution, perform a factory reset to clear any potentially corrupted data and restore default settings.

5. Perform Diagnostic Tests:

   • Use Diagnostic Tools: Utilize the drive’s diagnostic tools to test the EEPROM and identify any specific issues related to read or write operations.
   • Run Self-Test: If available, run a self-test or calibration procedure to check for EEPROM-related faults.