Parker AC650 Drive – Find comprehensive resources for Parker AC650 AC drives, including product catalogs, manuals, price list, programming guides, fault, alarm, warnings & software support. Get expert assistance for troubleshooting and optimization.
The Parker AC650 drive is a series of AC inverter drives designed for controlling the speed of AC induction motors. Whether you need to control a conveyor belt, automatic barrier, machine spindle or other general purpose application, the AC650 delivers reliable, cost-effective voltage/frequency speed control of your motor.
- Power rating – 0.25 to 7.5 kW
Features
AC650 drives come in a compact format with DIN rail mounting as standard allowing easy integration into any electrical control panel. The operator/programming keypad can be removed after setup to prevent unauthorised changes to inverter configuration. For simple motor speed control up to 7.5 kW (10HP), the AC650 series variable frequency AC drives provide an easy to use, out of the box solution that will have your system up and running in no time.
- Integrated operator keypad with option for remote mounting
- Integrated EMC filter ensures compliance while maintaining a compact footprint
- Flexible I/O including analogue and relay output and motor thermister input allowing greater control options
- Pre-programmed macros allowing quick and simple drive setup
- DIN rail mounting for easy integration into any electrical cabinet
- 6514 cloning module (option) allows easy back-up and transfer of parameters between different drives
Advantages:
- Diagnostic and control through the operator keypad
- Simplified operation throught the use of pre-programmed macros
- Simple speed control : set speed and voltage or current with start / stop direction control.
- Manual / Automatic control : set to run with local speed setting or external reference
- Preset speed control : select up to 8 pre-programmed speeds using digital inputs
- Increase / Decrease : increase or reduce speed using digital inputs
- PID Control : control the pressure, flow, temperature or any process variable.
Standards:
The AC650 series AC drives listed on this page meet the following standards when installed in accordance with the relevant product manual:
- CE Marked to EN50178 (Safety, Low Voltage Directive)
- CE Marked to EN61800-3 (EMC Directive)
- UL listed to US Standard UL508C
- cUL listed to Canadian Standard C22.2 #14
Technical Specifications/Power Supply:
- Single Phase Units
- 220-240 Vac +/- 10 %, 50-60 Hz +/- 5%
- Three Phase Units
- 380-460 Vac +/- 10 %, 50-60 Hz +/- 5%
Environment:
- 0-40°C (derate to 50°C)
- Up to 1000m ASL (derate 1% per 100m to 2000m maximum)
Protection:
- IP20
Overload:
- Constant torque rating: 150% for 30 seconds
Output Frequency:
- 0-240Hz
Inputs/Outputs:
- Analog Inputs 2; Speed Control
- 0-10V, 0-10V/4-20mA
- Analog Output 1; User configurable output frequency/load 0-10V
- Digital Inputs 3; User configurable Start/Stop/Direction/pre-set speeds (8)
- Digital Inputs/Outputs 1; User configurable as inputs or outputs
Digital Relay Output:
- Relay output 4A @ 240V
- All digital outputs configurable for: at (not at) speed/at (above) minimum speed/running (stopped)/health (tripped)/above (below) pre-set load
Motor Thermistor Input
Power Supply Outputs:
- 24 VDC (50mA) – Digital I/O Supply
- 10 VDC (10mA) – Analog reference supply
Communications Options:
- RS232
Technical Specification
| Output Power: | 0.25 to 7.5 kW |
| Input Voltage: | 1*230 VAC, 3*230 VAC, 3*380 to 460 VAC |
| Modes of Control: | V/Hz |
| Communication Interface: | RS232/RS485 |
| Specifications Met: | CE (EMC & LVD), UL Listed, cUL Listed |
| Operating Temperature: | 0 to 40 °C (derate up to 50°C max), 32 to 104 °F (derate up to 122°F max) |
| Operating Altitude: | up to 1000 m ASL (derate > 1000m) |
| Overload Rating: | 150 % for 60s – Heavy Duty Rating (Constant Torque) |